002 Hip Pocket

Designed for low profile concealment.   Holster front is wet molded but the back remains smooth.

The 007K features a tough hard body with sewn sight rails and detailed molding for a good fit. A center belt loop and a slot holds the holster close to the body, provides excellent concealment. Fits belts up to 1 3/4 inches. Available in Black, Natural, or Saddle Brown (Specify).

PCCH
Preferred Concealment Carry Holster

This fine holster is to be carried inside the waistband, strong side behind the hip. Its wide belt loop uses two pull-the-dot black snaps that function independently. Will fit 1 ½” belt. The PCCH has sewn sight rails and is form molded for an excellent fit. The top opening is reinforced for easy re-holstering.

H710 "First Agent"
For Automatics and Revolvers

This popular holster has double stitched lines and covered slots fore and aft. Rides high and close to the body. Fits belts up to 1 ¾.”

H715-M
Inside the Waistband Clip-On Holster
w/ Open Top

This inside the waistband holster is form molded from lightweight leather. The top opening of the holster is reinforced to aid in reholstering the weapon. The design works well strong side, crossdraw, or behind the hip.

H715-M.T.B.
Waistband Clip-On Holster
with Thumb Break Safety Strap

The H715 M.T.B. is the same inside the waistband holster as the H715-M, but this model features a thumb break safety strap.

Click here for pricing and ordering on our new site

Same as the H715-M except with a snap on belt loop.

        H717 "Agent 9"
               with Thumb Break

The Agent 9 is designed to carry
weapons of all barrel lengths.
Special features include covered
belt slots fore and aft, metal reinforced
thumb break, and double stitched
body. Fits belts up to 1 3/4."
Very concealable.                    

Click here for pricing and ordering on our new site

H720
Paddle Holster
with Thumb Break

The H720 Paddle Holster is designed for easy removal. The wide suede covered metal reinforced paddle uses a piece of leather 1/2" wide and 3/16" thick to create a ledge to help hold the paddle in place. When a belt is worn, a small wrap around loop can be snapped for extra holster retention. The H720 rides slightly muzzle to the rear. A layer of polyethylene adds extra strength and durability.

Same features as H720, but made to accommodate the Streamlight M3, M5, M6, or H&K Tactical Lights. Available for Most Glocks, H&K USP .40/.45 Full Size Only; S&W 4563TSW and 4566TSW.

Click here for pricing and ordering on our new site

H720 Open Top
Paddle Holster

The H720 O.T. rides high and close to the body. It features detailed molding to assure a good fit, and the wide suede covered metal reinforced paddle has a piece of leather 1/2" wide and 3/16" thick to create a ledge that helps hold the paddle in place.

Click here for pricing and ordering on our new site

H721
"Double Nine"

An evolution from the former Agent 9.
The "Double Nine" is made with a metal reinforced thumb break, recessed snap, and double stitching at stress areas. This holster has a covered trigger and barrel as well as covered slots fore and aft. Fits belts up to 1 3/4" wide.

Click here for pricing and ordering on our new site

AUTOMATICS - H721 O.T. (Open Top) is a great concealment holster. Covered slots fore and aft. Also features a bodyshield to provide comfort between weapon and the user. Rides high & close to the body. Fits belts up to 1 3/4. Available in Black or Saddle Brown: Finish: Plain

Click here for pricing and ordering on our new site

The belt loop design makes this holster ride high and close to the body, perfect for concealment carry. Molded fit, double stitched sew lines and metal reinforced thumb break. Fits belts up to 1 3/4"" wide. Available in Black, Saddle Brown or Natural: Finish– Plain. Also available with Hand Boned Detail.

Click here for pricing and ordering on our new site

With Directional Snap. Same as the H722 except this design features a low profile thumb break with directional snap. Will fit belts up to 1 3/4". Available in Black or Saddle Brown: Finish– Plain

Same features as H722 but made to accommodate the Streamlight M3, M5, M6, or H&K Tactical Lights. Available for Most Glocks, H&K USP .40/.45 Full Size Only; S&W 4563TSW and 4566TSW. Will fit belts up to 1 3/4". Black only.

H724
for automatics

The H724 features a reinforced open top, sewn sight rails, and detailed molding for a good fit. Provides excellent concealment. Available for small and large automatics. Fits belts up to 1 3/4".

H726
Semi Open Front
Pancake Holster

Similar to the popular H721 holster. The H726 is designed to enable the user to draw large weapons and still maintain a natural draw. With the spring loaded partially open front, it is only necessary to raise the weapon a short distance before executing the draw. Metal reinforced thumb break, double stitched lines, and slotted fore and aft, the H726 fits belts up to 1 3/4".

H760
Ankle Holster for
Small Frame Automatics & Revolvers

The foam padding and suede covering make the H760 ankle holster extremely comfortable. Velcro fasteners allow for adjustment for both ankle and from garter to holster.

Click here for pricing and ordering on our new site

This holster is form molded to a snug fit, compact, easy to conceal, and the draw is smooth and fast. The belt loop design will permit the holster to be worn small of back or strong side. Also features a bodyshield to provide comfort between the weapon and the user. Fits belts up to 1 3/4". Available in Black or Saddle Brown: Finish: Plain

J.I.T. Slide

The design of this holster is to carry medium to small automatics. Features include an open bottom, wrap around front, belt loop at the center, and a covered slot that pulls the weapon close to the body. Fits belts up to 1 3/4".

Click here for pricing and ordering on our new site

This holster is ideal for those who spend a lot of time sitting. Features are form molded fit, double stitched sew lines, and metal reinforced thumb break. Has a sewn down belt loop at center and the belt slot pulls the weapon close to the body. Will fit belts up to 1 3/4". Available in Black or Saddle Brown: Finish: Plain.

Click here for pricing and ordering on our new site

AUTOMATICS - The S.S.C.D. holster is made of heavy weight cowhide and features a metal reinforced thumbreak with recessed snap and double stitched sew lines. The three slots will permit the user to position the holster cross draw or strong side, slight muzzle rear or straight up and down. Fits belts up to 1 3/4". Available in Black or Saddle Brown: Finish: Plain.

Click here for pricing and ordering on our new site

Y.S.O. incorporates two screws with rubber washers for tension adjustment. On the back side is a cut-out for the pant belt loop and two holes for the tension screw adjustment, double stitched and form molded. Available in Black or Saddle Brown: Finish: Plain.